Recently Published Documents

The purpose of this document is to specify, how LEDs thermal metrics and other thermally-related data are best identified by physical measurements using well established testing procedures defined for thermal testing of packaged semiconductor devices (published and maintained by JEDEC) and defined for characterization of light sources (published and maintained by CIE – the International Commission on Illumination).

This standard provides a comprehensive definition of the NOR cryptographic security hardware abstraction layer (HAL). It also provides design guidelines and reference software to reduce design-in overhead and facilitate the second sourcing of secure memory devices. It does not attempt to standardize any other interaction to the NOR device that is not related to cryptographic security functionality within the device.

This document provides a unified collection of the commonly used terms and definitions in the area of LED thermal measurements. The terms and definitions provided herein extend beyond those used in the JESD51 family of documents, especially in JESD51-13, in order to include other often used terms and definitions in the area of light output measurements of LEDs. Definitions, symbols and notations regarding light output measurements used here are consistent with those defined in JESD77C.01 and with those defined by CIE (International Commission on Illumination), especially in the International Lighting Vocabulary, CIE S 017/E:2011 ILV and in the CIE 127-2007 document as well as in some other relevant standards of other standardization bodies from the solid-state lighting industry, e.g., ANSI/IESNA RP 16-05.

This white paper presents the recent knowledge of system ESD field events and air discharge testing methods. Testing experience with the IEC 61000-4-2 (2008) and the ISO 10605 ESD standards has shown a range of differing interpretations of the test method and its scope. This often results in misapplication of the test method and a high test result uncertainty. This white paper aims to explain the problems observed and to suggest improvements to the ESD test standard and to enable a correlation with a SEED IC/PCB co-design methodology.

This standard defines the specification of interface parameters, signaling protocols, and features for PMIC devices used for memory module applications. The designation PMIC5100 refers to the device specified by this document. The purpose is to provide a standard for the PMIC5100 device for uniformity, multiplicity of sources, elimination of confusion, ease of device specification, and ease of use. Item 336.01C

This test method is offered as a standardized procedure to determine the total dose limit of DRAMs by measuring its refresh time tRef degradation after the device is irradiated with an X-Ray dose. This test method is applicable to any packaged device that contains a DRAM die or any embedded DRAM structure. Some indirect test methods such as wafer level characterization of total dose induced changes in leakage of access transistors are not described in this standard but are permissible as long as a good correlation is established.

This document provides stress procedures, general failure criteria and documentation guidelines such that the dv/dt robustness can be demonstrated, evaluated and documented. This document gives examples for test setups which can be used and the corresponding test conditions. Additionally, criteria are explained under which device manufacturers can select an appropriate test setup.

Item 11.14-209A

Designator: PMXC-G32[39]_1p0-R19p35x21p0Z3p2-N23p4T#

Item 11-993

Designator: PBGA-B#[#]_I0p73...

Item: 11.4-996E

Designator: SBGA-M7775[23828]_D0p073...

Item: 11.4-996

Access STP Files for MO-349A

Cross Reference: DR4.26

This standard defines the DDR5 SDRAM Specification, including features, functionalities, AC and DC characteristics, packages, and ball/signal assignments. The purpose of this Standard is to define the minimum set of requirements for JEDEC compliant 8 Gb through 32 Gb for x4, x8, and x16 DDR5 SDRAM devices. This standard was created based on the DDR4 standards (JESD79-4) and some aspects of the DDR, DDR2, DDR3, and LPDDR4 standards (JESD79, JESD79-2, JESD79-3, and JESD209-4). Item 1848.99M.

This standard describes a functional specification of the Host Controller Interface (HCI) for Universal Flash Storage (UFS). The objective of UFSHCI is to provide a uniform interface method of accessing the UFS hardware capabilities so that a standard/common Driver can be provided for the Host Controller. The common Driver would work with UFS host controller from any vendor. This standard includes a description of the hardware/software interface between system software and the host controller hardware. It is intended for hardware designers, system builders and software developers. This standard is a companion document to [UFS], Universal Flash Storage (UFS). The reader is assumed to be familiar with [UFS], [MIPI-UNIPRO], and [MIPI-M-PHY]. Item 206.25

This annex JESD309-S0-RCB, DDR5 Small Outline Dual Inline Memory Module with 0-bit ECC (EC0 SODIMM) Raw Card B Annex" defines the design detail of x8, 2 Package Ranks DDR5 NECC SODIMM. The common feature of DDR5 SODIMM such as the connector pinout can be found in the JESD309, DDR5 Small Outline Dual Inline Memory Module (SODIMM) Common Standard.

This annex JESD308-U0-RCA, DDR5 Unbuffered Dual Inline Memory Module (UDIMM) Raw Card A

Annex defines the design detail of x8, 1 Package Rank DDR5 UDIMM. The common feature of DDR5 UDIMM such as the connector pinout can be found in the JESD308, DDR5 Unbuffered Dual Inline Memory Module (UDIMM) Common Standard. Item 2265.13A

This annex JESD308-U4-RCE, DDR5 Unbuffered Dual Inline Memory Module (UDIMM) with 4-bit ECC (EC4 SODIMM) Raw Card E Annex" defines the design detail of x8, 2 Package Ranks DDR5 ECC UDIMM. The common feature of DDR5 UDIMM such as the connector pinout can be found in the JESD308, DDR5 Unbuffered Dual Inline Memory Module (UDIMM) Common Standard. Item 2265.12A

This annex JESD308-U0-RCC, “DDR5 Unbuffered Dual Inline Memory Module (UDIMM) Raw Card C Annex” defines the design detail of x16, 1 Package Ranks DDR5 UDIMM. The common feature of DDR5 UDIMM such as the connector pinout can be found in the JESD308, DDR5 Unbuffered Dual Inline Memory Module (UDIMM) Common Standard. Item 2265.08A

Editorial, Terminology Update. This standard defines the dc and ac single-ended (data) and differential (clock) operating conditions, I/O impedance's, and the termination and calibration scheme for 1.35 V Pseudo Open Drain I/Os. The 1.35 V Pseudo Open Drain interface, also known as POD135, is primarily used to communicate with GDDR5 or GDDR5M SGRAM devices. Item 146.01B

This annex JESD309-S4-RCE, DDR5 Small Outline Dual Inline Memory Module with 4-bit ECC (EC4SODIMM) Raw Card E Annex" defines the design detail of x8, 2 Package Ranks DDR5 ECC SODIMM. The common feature of DDR5 SODIMM such as the connector pinout can be found in the JESD309, DDR5 Small Outline Dual Inline Memory Module (SODIMM) Common Standard.

This annex JESD309-S0-RCC, DDR5 Small Outline Dual Inline Memory Module (SODIMM) Raw Card
C Annex defines the design detail of x16, 1 Package Ranks DDR5 SODIMM. The common feature of DDR5 SODIMM such as the connector pinout can be found in the JESD309, DDR5 Small Outline Dual Inline Memory Module (SODIMM) Common Standard.

Terminology Update, see Annex. This standard defines JEDEC requirements for solid state drives. For each defined class of solid state drive, the standard defines the conditions of use and the corresponding endurance verification requirements. Although endurance is to be rated based upon the standard conditions of use for the class, the standard also sets out requirements for possible additional use conditions as agreed to between manufacturer and purchaser.  Revision A includes further information on SSD Capacity. Items 303.19, 303.20, 303.21, 303.22, 303.23, 303.26, 303.27, 303.28, and 303.32

In some cases, JEDEC Committees have established additional policies and guidelines to facilitate the operation of a particular committee. Additional policies and guidelines are set forth here as an addendum to JM21 to facilitate the operation of particular committees. These policies are in addition to the requirements set forth in JM21 and in no case shall these additions contradict or supersede the requirements in JM21.

Release No. 19.01. Item 1739.02E, Terminology update. 

This standard defines the specifications of interface parameters, signaling protocols, and features for Serial Presence Detect (SPD) EEPROMs as used for memory module applications.

This standard specifies the eXpanded Serial Peripheral Interface (xSPI) for Non Volatile Memory Devices, which provides high data throughput, low signal count, and limited backward compatibility with legacy Serial Peripheral Interface (SPI) devices. It is primarily for use in computing, automotive, Internet Of Things (IOT), embedded systems and mobile systems, between host processing and peripheral devices. The xSPI electrical interface can deliver up to 400 MBytes per second raw data throughput. Item 1775.74.

Release No. 21.01, Terminology update.

This standard defines the specifications of interface parameters, signaling protocols, and features for Serial Presence Detect (SPD) EEPROMs and Temperature Sensor (TS) as used for memory module applications. The designation TSE2002av refers to the family of devices specified by this document.