Global Standards for the Microelectronics Industry
Standards & Documents Search
Title | Document # |
Date![]() |
---|---|---|
Registration - Plastic Dual Small Outline, 1.00 MM pitch5.48 MM width Rectangular Family Package |
MO-351A | Jun 2022 |
PDSO-G10_I1p)...Item 11.11-1005 Committee(s): JC-11.11 Free download. Registration or login required. |
||
SPD5118, SPD5108 HUB AND SERIAL PRESENCE DETECT DEVICE STANDARD |
JESD300-5A | Jun 2022 |
This standard defines the specifications of interface parameters, signaling protocols, and features for DDR5 Serial Presence Detect EEPROM with Hub function (SPD5 Hub) and integrated Temperature Sensor (TS) as used for memory module applications. The Hub feature allows isolation of a local bus from a master host bus. The designations SPD5118 and SPD5108 refer to the families of devices specified by this document. The term SPD5 Hub refers generically to both devices in the family. Committee Item 1852.07H. Committee(s): JC-42.4 Free download. Registration or login required. |
||
JEDEC COMMITTEE SCOPE MANUAL |
JM18T | Jun 2022 |
The JEDEC Board of Directors is responsible for establishing appropriate committees to conduct its standardization activities. These committees are assigned either service or product responsibilities. It is a primary function of each committee to propose JEDEC Standards and to formulate policies, procedures, formats, and other documents that are then submitted to the Board of Directors for action or approval. This publication identifies the service and product committees established by the Board of Directors and defines their scopes. Committee(s): JC-COUN Free download. Registration or login required. |
||
SOLID STATE DRIVE (SSD) REQUIREMENTS AND ENDURANCE TEST METHOD |
JESD218B.02 | Jun 2022 |
Terminology Update, see Annex. This standard defines JEDEC requirements for solid state drives. For each defined class of solid state drive, the standard defines the conditions of use and the corresponding endurance verification requirements. Although endurance is to be rated based upon the standard conditions of use for the class, the standard also sets out requirements for possible additional use conditions as agreed to between manufacturer and purchaser. Revision A includes further information on SSD Capacity. Items 303.19, 303.20, 303.21, 303.22, 303.23, 303.26, 303.27, 303.28, and 303.32 Committee(s): JC-64.8 Available for purchase: $76.00 Add to Cart Paying JEDEC Members may login for free access. |
||
JEDEC COMMITTEE SPECIFIC ADDITIONAL POLICIES |
JM12B | Jun 2022 |
In some cases, JEDEC Committees have established additional policies and guidelines to facilitate the operation of a particular committee. Additional policies and guidelines are set forth here as an addendum to JM21 to facilitate the operation of particular committees. These policies are in addition to the requirements set forth in JM21 and in no case shall these additions contradict or supersede the requirements in JM21. Committee(s): JC-JEDC Free download. Registration or login required. |