Standards & Documents Search

This test method defines the requirements and procedures for terrestrial destructive* single-event effects (SEE) for example, single-event breakdown (SEB), single-event latch-up (SEL) and single-event gate rupture (SEGR) testing . It is valid when using an accelerator, generating a nucleon beam of either; 1) Mono-energetic protons or mono-energetic neutrons of at least 150 MeV energy, or 2) Neutrons from a spallation spectrum with maximum energy of at least 150 MeV. This test method does not apply to testing that uses beams with particles heavier than protons.

*This test method addresses a separate risk than does JESD89 tests for non-destructive SEE due to cosmic radiation effects on terrestrial applications.

Committee(s): JC-14.1

Free download. Registration or login required.

This document is intended to guide device manufacturers in developing datasheets and to device customers in understanding datasheet entries.

Committee(s): JC-14.3

Free download. Registration or login required.

This document, while establishing the complex nature of System Level ESD, proposes that an efficient ESD design can only be achieved when the interaction of the various components under ESD conditions are analyzed at the system level. This objective requires an appropriate characterization of the components and a methodology to assess the entire system using simulation data. This is applicable to system failures of different categories (such as hard, soft, and electromagnetic interference (EMI)). This type of systematic approach is long overdue and represents an advanced design approach which replaces the misconception, as discussed in detail in JEP161, that a system will be sufficiently robust if all components exceed a certain ESD level.

Committee(s): JC-14, JC-14.3

Free download. Registration or login required.

The purpose of this publication is to provide an overview of some of the most commonly used systems and test methods historically performed by manufacturers to assess and qualify the reliability of solid state products. The appropriate references to existing and proposed JEDEC (or EIA) standards and publications are cited. This document is also intended to provide an educational background and overview of some of the technical and economic factors associated with assessing and qualifying microcircuit reliability.

Committee(s): JC-14, JC-14.3

Free download. Registration or login required.

This document describes transistor-level test and data methods for the qualification of semiconductor technologies. It does not give pass or fail values or recommend specific test equipment, test structures or test algorithms. Wherever possible, it references applicable JEDEC such as JESD47 or other widely accepted standards for requirements documentation.

Committee(s): JC-14.2

Free download. Registration or login required.

This document describes backend-level test and data methods for the qualification of semiconductor technologies. It does not give pass or fail values or recommend specific test equipment, test structures or test algorithms. Wherever possible, it references applicable JEDEC such as JESD47 or other widely accepted standards for requirements documentation.

Committee(s): JC-14.2

Free download. Registration or login required.

This document was written with the intent to provide information for quality organizations in both semiconductor companies and their customers to assess and make decisions on safe ESD level requirements. It will be shown through this document why realistic modifying of the ESD target levels for component level ESD is not only essential but is also urgent. The document is organized in different sections to give as many technical details as possible to support the purpose given in the abstract. In June 2009 the formulating committee approved the addition of the ESDA logo on the covers of this document. Please see Annex C for revision history.

Committee(s): JC-14, JC-14.3

Free download. Registration or login required.

This publication describes guidelines for applying JEDEC reliability tests and recommended testing procedures to integrated circuits that require adapter test boards for electrical andreliability testing. These tests are used frequently in qualifying integrated circuits as a newproduct, a product family, or as products in a process which is being changed.

Committee(s): JC-14.3

Free download. Registration or login required.

This purpose of this white paper will be to introduce a new perspective about EOS to the electronics industry. As failures exhibiting EOS damage are commonly experienced in the industry, and these severe overstress events are a factor in the damage of many products, the intent of the white paper is to clarify what EOS really is and how it can be mitigated once it is properly comprehended.

Committee(s): JC-14.3

Free download. Registration or login required.